ACSR cable (Aluminum Conductors Steel-Reinforced)

ACSR is widely used in overhead power transmission lines with various voltage levels.

Product Standard:

1. GB/T 1179-2008

2. IEC61089-1997

3. BS 215 part 2

4. ASTM B232/B232M-01ε1

5. ASTM B498/B498M-2002

6. DIN48204

Application:

The ACSR is twisted by steel wires and aluminum wires. It is suitable for overhead power transmission and distribution lines.

Advantage:

ACSR has a simple structure, easy to set up and maintenance, low-cost lines, transmission capacity, but also conducive to cross-rivers and valleys, such as the laying of special geographical conditions, has good conductive properties and sufficient mechanical strength, tensile strength of large , shot from the tower can be enlarged and so on. Therefore, it widely used in a variety of voltage levels of overhead transmission and distribution lines.

Remarks:

Not allowed to touch trees.

Specification:

Cross-section	Stranding& Wire Diameter		Approx Overall Diameter	Sectional Area			Approx Weight	Breaking load	DC resistance
	Al	Steel		Al	Steel	Total
	mm	mm	mm	mm2	mm2	mm2	Kg/km	KN	Ohm/km
16	6/1.84	1/1.84	5.53	16	2.67	18.7	64.6	6.08	1.7934
25	6/2.30	1/2.30	6.91	25	4.17	29.2	100.9	9.13	1.1478
100	6/4.61	1/4.61	13.8	100	16.7	117	403.8	34.33	0.2869
125	18/2.97	1/2.97	14.9	125	6.94	132	397.9	29.17	0.2304
160	18/3.36	1/3.36	16.8	160	8.89	169	509.3	36.18	0.18
250	22/3.80	7/2.11	21.6	250	24.6	275	880.6	68.72	0.1154
400	54/3.07	7/3.07	27.6	400	51.9	452	1510.3	123.04	0.0723
450	54/3.26	7/3.26	29.3	450	58.3	508	1699.1	138.42	0.0643
500	54/3.43	7/3.43	30.9	500	64.8	565	1887.9	153.8	0.0578
560	54/3.63	19/2.18	32.7	560	70.9	631	2103.4	172.59	0.0516
630	54/3.85	19/2.31	34.7	630	79.8	710	2366.3	191.77	0.0459
710	54/4.09	19/2.45	36.8	710	89.9	800	2666.8	216.12	0.0407
800	72/3.76	7/2.51	37.6	800	34.6	835	2480.2	167.41	0.0361
900	72/3.99	7/2.66	39.9	900	39.9	939	2790.2	188.33	0.0321

ACSR cable (Aluminum Conductors Steel-Reinforced)